Sunday, September 22, 2013

Touches of Autumn

September is coming to a close… the air is getting brisk and fall is on its way!  To herald its arrival, I have spruced up a few spaces around the house with some autumn touches. 

I decided to forego the plethora of red and orange leaves, garland and pumpkins this year in exchange for some dried florals along with green and metallic touches.

Let’s start in the kitchen!  My tiny shelf got a little spruce with a gold framed quote (design found here), my tiny velvet pumpkin (squee!) and my milk glass vase filled with dried green and rust hydrangea blossoms.  I love this look.

IMG_4477

And I couldn’t resist bringing my new cola crate into the mix with a couple of green pumpkins, some feathers and yes, some fall floral picks!  But only just a couple. I tried to resist, I did!

IMG_4496

In the dining room, I am keeping the centerpiece simple so it can easily be cleared away for a spontanous board game.  The wire vase is filled with moss and berries and an ivory candle.  My thrift store pewter candlesticks are flanking with matching berry bobeches.  And I cut a little burlap runner for the table, too.

IMG_4504

Over on the flatware cabinet, we are bringing in the glam!  My sparkling mercury glass pumpkin (from Pottery Barn) is joined by my Target candlesticks and a vintage silver tray.  More berries and fall leaves plus a few metallic gourds finish out the display.  And another burlap runner adds a bit of contrast and texture.

IMG_4508

The living room console is always the place I start with holiday decorating.  I topped it with a burlap runner and a wonky pumpkin.  Then I brought in a new addition:  this spray painted silver frame.  I took a glass frame and sprayed it with Looking Glass paint for a mercury glass effect.  It’s going to live at my parents’ house for the Halloween party decor soon, but I wanted to share it first!

IMG_4530

Basically you spray the inside of the thing (or in my case, the back) with looking glass paint and let it dry.  Then you mist on a vinegar/water mixture and after letting that sit for a minute, you blot it off and some of the paint comes off with it.  That gives your mirrored finish a bit of an antique look.  I sprayed the front of my frame too since it had some frosted glass as well. The swirly parts were frosted so they didn’t come out as mirrored, but I figure it is a pretty good interpretation.  And I think it looks fun with the Happy Halloween chalk printable inside.  :)

IMG_4525

Over on the side table, my little fall pumpkin tealights are joined by the antique toolbox stuffed with more dried hydrangeas.  Gorgeous!!

IMG_4529

And on the door, our simple grapevine wreath. 

IMG_4513

Welcome Fall!  We have been waiting for you! :)

signature pink

Thursday, September 12, 2013

DIY Cowboy Party Decorations

Last time I told you how we celebrated my nephew’s first birthday with a “Cowboys Down on the Farm” themed party.  Today I am back to share how we created the various DIY elements for the party.  We crafted a banner, several fabric garlands, the paper fan backdrop, the party favors, and a scattering of printables.

I designed the invitation in Publisher; it’s modeled after one I found on etsy.  Ours featured a red bandana and cow print background with a rope border and plenty of country charm.  The western fonts I used are Nashville, Coffee Tin, HFF Young Wanna, Pointedly Mad, and EcuyerDAX.  The back of the invite included a photo of the birthday boy and directions to the farm.  I love it!

party invite_thumb[1]

The rest of the printed cards and signs incorporated the same graphics and fonts.  I made several signs directing guests to games, favors, drinks, and food.  There was also plenty of cow print garland in various sizes decorating the tables and even the little birthday boy’s high chair!

IMG_4141

IMG_4164

IMG_4167

IMG_4171

The birthday banner was also created using Publisher.  I drew out all the shapes and filled them with graphics that I found online.  There was cow print, plaid, dots, horseshoes, chickens, pigs, and stars in shades of red, blue, brown and yellow.  Then I punched holes in each square and tied them together with little twine knots.

IMG_4191

The photo wall below the banner showcased photos from Ruger’s first year.  We backed all the photos with cardstock in red, blue, brown, green, orange and yellow to coordinate with each photo.  The photos were pinned onto twine strung from the siding.   This was a highlight of the party.  It was colorful and decorative and also really fun for people to see all the pictures of baby Ruger!

The fabric pennant garlands were made with red and blue bandana fabrics that I cut in triangles and stitched together on a bias binding.  These garlands went all around the open sides of the carport.  The piece on the front was something I made for my fourth of July party last year.  I figured since it was red, white and blue it would work with our theme.

IMG_4151

IMG_4406

My favorite thing that we made for the party was the paper fan backdrop and centerpieces.  I saw these centerpieces on Kara’s Party Ideas and I knew I had to make them!  It took me a while to figure out what these little paper things are called.  But eventually I found a great tutorial for “paper fan rosettes” over at A Blissful Nest and set to work folding and cutting.  I got all my scrapbook paper from Scrapbook.com.  They have a wonderful selection of double-sided cowboy and farm themed paper!  It was so much fun combining all the different prints.  After I cut and folded my fans, I simply glued a wooden skewer into the folds at the bottom.  I filled my tin buckets (from Walmart) with floral foam and pea gravel (so they would be heavy enough not to blow over) and then I stuck the sticks in the foam.  After I was happy with my color combinations and heights, I hot glued crinkled brown paper filler on top of the foam.  Voila!  Cheap, easy and reusable centerpieces!

IMG_20130723_213040_166

The tables were decorated with red and blue bandanas which I found on Ebay and at Walmart and then topped with a paper fan centerpiece.  The best part was that the fans are double-sided so opposite sides of the table got a different view!

IMG_4157

IMG_4160

The centerpieces complemented the paper fan backdrop on the far wall of the carport.  We wanted to have access to the doors which go into a storage building during the party.  It was great to have that space for coolers and party boxes.  So, I suggested using large solid color paper fans to decorate the doors without impeding their function.  Hannah and I had a “party crafts” day and made a bunch of red, blue, brown, and cow print rosettes in various sizes to hang on the doors.  (The solid colors ones could be reused for other parties by changing the center circle paper… I’m thinking they would look awesome for July 4th, too!)

IMG_20130813_131419_575

IMG_20130813_131731_545

Hannah had the brilliant idea to glue magnets to the backs of the fans so they would easily stick to the metal doors.  We added layers of cardboard on the back of the smaller ones before sticking the magnet on.  That gave them a bit of height so we could layer them on top of the larger ones.  It worked so well!  And none of them blew away in the breeze! 

After a few tries we had them arranged like we liked.  :)  In the end, it was a gorgeous, colorful backdrop for photos, cake and presents.  And the brown doors tied in with our color scheme, too! 

IMG_4140

IMG_3093

And last but not least, we have the cake—a true DIY masterpiece! :)  I spent five hours the night before the party baking and decorating all the cakes and cupcakes.  But it was worth it!

IMG_4168

I saw this cake featured in a different cowboy birthday party at Kara’s Party Ideas.  I made a white cake (with a recipe from Betty Crocker) and crusting no-melt buttercream frosting (from Thyme Bombe).  The cupcakes and smash cake are the same recipe, but the tiered cake was the piece de resistance!  I frosted the layers using the Viva paper towel method for smoothing and then added black icing (store bought in a tube) in random spotty shapes.  After letting it set a bit in the fridge, I used my paper towel to smooth out the black icing and kind of smush it into the white icing.  It made the spots flatter and more integrated into the rest of the frosting.  I think it turned out awesome!  I especially like the little squiggly edges of the spots, which look more realistic than pieces of fondant cut out.  The “rope” border is caramel icing piped with a star tip. 

For the topper, Hannah wanted a number “1”.  I made this one using foam board and bandana fabric.  Basically I printed a number 1 and cut out three copies from foam core.  Then I taped them all together so it would be really thick.  Next I cut a piece of bandana fabric and started gluing it onto the foam, starting with a flat plane of fabric on the front.  I just kept clipping and gluing until the whole thing was secure and covered with fabric.  I had to piece a couple of places with a small section of fabric to cover all the foam.  After it was covered with fabric, I painted on a nice layer of Mod Podge so it couldn’t fray or come unglued.  Isn’t it cute?  After this picture was taken, I stuck the end of a wooden skewer (cut off short) into the bottom, which held it in place on the cake.

IMG_20130718_142605_050

The little banner on top of the cake was an afterthought that I saw on Kara’s Party Ideas.  I created it in Publisher using a banner graphic and adding the text on top.  I cut it out and glued wooden skewers on the back before sticking it in the cake, although I think the striped straws would have been cute standards, too!  These are easy decorations that don’t take hours of tedious frosting. :)

IMG_4168

For the cupcake toppers I created graphics in Publisher and cut them out using my new circle punch!  I did four designs, two with phrases and two with the number “1”.  Then I simply taped toothpicks on the back of each circle before sticking them in the cupcakes.  The cupcake papers were red and blue bandana print, they are made by Wilton. :)

IMG_20130903_223110_721

IMG_4156

The favors were also a DIY project.  We made cowboy cookie mix in a mason jar for the guests to take home and bake themselves.  The recipe can be found here.  After pressing the ingredients into the jars, we tied a little tag on the top with twine.  Ruger’s Cowboy Cookies were a big hit! :)

IMG_4146

I had so much fun working on all the decorations and projects for this party.  The best part about our decor is that except for the balloons, it is totally reusable.  I wanted to spend money on things that we could keep and use again instead of throwing away.  So of course all of these creations are going into my growing “party vault” so we can bring them back out for the next family cowboy party! :) 

Hope you find some inspiration here for your next shindig.  If not, mosey on over to my “Party Time” category for more ideas! :)

signature pink

Wednesday, September 11, 2013

A Rootin’ Tootin’ 1st Birthday Party

It has been a flurry of activity around here lately.  We’ve been preparing for a very special celebration.  On Monday my nephew turned one!  We celebrated country style with a Cowboy/Farm themed party on Saturday. 

My sister Hannah and I have been planning this party for months.  We spent countless hours scouring the internet for inspiration, making decorations, planning the menu, and designing the invitation and printables.

The invitation set the theme for the soiree with cow print and bandana print.

party invite

The party was held under my sister’s covered carport, which we decorated with red and blue fabric garland and balloons.

IMG_4405

IMG_4406

IMG_4407

The brown doors lead to a storage area, so to pretty them up, we covered them with paper fan rosettes.  The birthday boy’s high chair went in front.  He had to be the center of attention, obviously!  Colorful balloons and cow garland decorated his seat. :)

cowboy party paper fan decorations

The sides of the carport were decorated with red and blue bandana garland and more balloons. 

IMG_4151

A “Happy Birthday” banner set off the left wall which was strung with photos from Ruger’s first year.  Hannah had so many adorable photos of her firstborn that we had to incorporate those into the decor for all the guests to enjoy during the party.  The gift table and cake were displayed below.

IMG_4191

IMG_4138

The rustic cake stand was made by Hannah’s husband from slices of a tree trunk.  Ruger’s “smash cake” took up the top tier and cupcakes for the guests were below.  And just for good measure we had a layer cake, too!

IMG_4171

The two tier white cake was covered with black cow print with a piped rope border.  A banner on top and a fabric covered number “1” decorated the top.

cow print cake

The cake was displayed on stacked potato crates from the family farm.  Inside the crates we displayed the party favors:  jars of cowboy cookie mix tied with little recipe cards.

IMG_4153

cowboy cookie favors party

On the other side of the doors was a second photo wall.  Beneath that was the drink table strung with garland.  The beverage dispensers were giant jars (from World Market) and beverages were served in pint jars with striped straws!

IMG_4165

IMG_4164

The tables were set with white tablecloths and bandana toppers in red and blue.  For the centerpieces I made little paper fan rosettes on sticks and stuck them in a tiny tin bucket.  The various red, blue and brown papers were all cowboy themed!

IMG_4157

IMG_4160

Several floral arrangements invoked a country feel with yellow and white wildflowers and golden sunflowers nestled in mason jars.  These were originally designed to decorate the food tables, but we had so much food there was no room for flowers! :)

IMG_4192

The buffet was set with pork barbecue, coleslaw, potato salad, baked beans, fruit and veggies.  We served the food in aluminum pans and baskets to bring in the farm theme.  I figure the chuck wagon serves food in tin trays, right? :)  Giddy up and grab some grub!

IMG_4211

IMG_4212

IMG_4213

IMG_4214

The “eatin’ irons” and napkins were arranged in my antique toolbox, which is a favorite of mine for parties and centerpieces.  Unfortunately, it slipped my mind and I didn’t get a photo.

All the cowpokes and farmhands in attendance dug into the cowboy fixin’s and had their turn hanging out with the birthday boy.

IMG_4229

IMG_4227

IMG_4184

IMG_4252

IMG_4265

While the adults enjoyed plentiful food, drinks and conversation, the little cowpokes entertained themselves with cornhole, frisbee, bubbles, and farm themed coloring pages.

cowboy party kids activity table

IMG_4273

At the entrance to the party we set up a little photo area with western props—an antique wagon wheel, a pony saddle and a cute stuffed horse along with a couple horseshoes and some spurs.  The little cowpokes loved it!

IMG_4178

IMG_4446

The birthday boy finally warmed up to the horse and had his picture made, too! :)

IMG_3053

After dinner, we all gathered round to watch Ruger have his first birthday cake!

IMG_4221-001

IMG_4340-001

IMG_4369-001

I think he enjoyed it. :)  After cake, Ruger had a fun time helping to open all his presents.

DSCN4899

IMG_4387

IMG_4417

At the end of the party, the little birthday boy was caught trying to steal a cupcake!  Apparently he wasn’t satisfied with his cake.  :)

DSCN4928

We all had such a wonderful time at his cowboy party!  I took so many pictures that I actually filled my memory card.  (That’s never happened!  Time for an upgrade! haha) 

IMG_3085

IMG_3093

Happy Birthday Little Ruger!

IMG_4455

I’ll be back soon to share all the DIY details from our Cowboy party!

signature pink